Modbus RS485 Metal Tipping Bucket Rain Sensor
$269.00 USD
This RS485 IOT Sensor is a rain sensor with Metal Tipping Bucket. It supports RS485 Modbus protocol.
This RS485 IOT Sensor is a rain sensor with Metal Tipping Bucket. It supports RS485 Modbus protocol.
Technical Parameter | |
Barrel inlet size | Diameter 200mm |
Sharp edge | 40-45° |
Rain intensity range | 0.01mm-4mm/min (Allow maximum rain intensity) |
Testing Accuracy | ≤±3% |
Power Voltage | 5-24V DC 12-24V DC |
Communication mode | double contact on/off signal output |
Resolution | 0.2mm |
Ambient temperature | -10~+50°C |
Relative humidity | <95%(40°C) |
Size | dia 216*460mm |
Output Signal | Signal Mode Data conversion method |
Voltage signal 0-2vdc Rainfall=50*V | |
Voltage signal 0-5vdc Rainfall=20*V | |
Voltage signal 0-10vdc Rainfall=10*V | |
Current signal 4-20mA Rainfall=6.25*A-25 | |
Pulse signal (pulse) 1 pulse represents 0.2mm rainfall | |
Digital signal(RS485) standard Modbus-RTU protocol, baud rate9600 | |
Check digit: None, data bit:8 bits, stop bit:1 (address defaults to 01) |